Both front and rear arms NOW IN STOCK as well as the matching front anti-roll bars and sets and shock relocation parts.
Just announced, the new straight wishbones for the Phi'09, mounting points already milled into the 09 chassis for these.
Finally, the straight wishbones for the RDX PHI '09 for front and rear are available and we expect to have them here soon. The RDX PHI '09 will be delivered with the chassis which is already designed to be installed with front & rear straight wishbones. The wishbones are packed in pairs.
The rear wishbones are designed to allow the mounting of shocks and anti roll bar on the front side of the rear wishbones (as it comes in the standard kit).It is also possible to mount on the backside of the rear wishbones. Also the shock positions on the rear wishbones can be positioned in between the standard positions just by turning the wishbone over.
If you wish to mount the rear shocks behind the shock tower, adding slightly more weight over the rear axle, then we now have the following parts to do this. You will require 1 of each of the following:
Additional droop adjusting screws for both front and rear suspension arms:
If you wish to run Anti-roll bars with these new straight arms, the Phi/09 front arms will require the previous RDX/Assassin A/R bar wire versions ... the part numbers for these are:
#79412A Anti-Roll Bar Set 1.3mm "Silver" Long
#79414A Anti-Roll Bat Set 1.6mm "Brass" Long
#79416A Anti-Roll Bar Set 1.9mm "Black" Long
|Page 5 of 7|